Raymax Three Rollers Bending Machine Automatic Customized CNC for Metal Steel Processing Roller Hydraulic Rolling Machine W11

• Customization: Available
• After-sales Service: Online Technical Support
• Warranty: 2 Years
• Model NO.: W11
• Machine Type: Roller-Bending Machine
• Roller: Three
• Electric Parts: Siemens
• Max. Roll Thickness: 30
• Control Panel: Movable
• Automation: Automatic
• Rolling Speed (M/Min): 1 - 4.5
• Motor Power (Kw): 7.5
• Controller: PLC
• Machinery Test Report: Provided
• Transport Package: Wooden
• Specification: Customized
• Trademark: RAYMAX
• Origin: China

Product Description

Product Description

W11 mechanical three-roller plate rolling machine is mainly used for rounding off plates from 4mm to 40mm and 1500mm to 4000mm in length, it is a very affordable and economical plate rolling machine, which is the best choice for customers with small processing volume.

 

The structure of the machine is three-roll symmetrical, the upper roller in the middle of the two lower rollers symmetrical position for vertical lifting movement, through the screw worm drive to obtain the upper roller for lifting movement, through the reducer output gear meshing with the lower roller gear to obtain the two lower rollers for mutual rotation movement, to provide torque for the rolling plate. The machine is a whole structure, the working part and the main driving part are installed on a rigid welding base, which facilitates the installation and debugging of the machine. 

Parameters

Model	Max. roll thickness - (mm)	Max. roll width - (mm)	Upper roller diameter - (mm)	Bottom roller diameter - (mm)	Central distance - (mm)	Main motor
W11-6x1500	6	1500	160	160	220	4
W11-4X2500	4	2500	160	140	220	5.5
W11-6x2000	6	2000	170	150	250	5.5
W11-8x2500	8	2500	240	180	280	7.5
W11-10x2500	10	2500	250	190	320	11
W11-12x2500	10	2500	260	220	320	11
W11-16x2500	16	2500	280	240	360	11
W11-20x2000	20	2000	280	240	360	11
W11-25x2500	25	2500	370	280	480	22
W11-30x2000	30	2000	360	290	480	22

Working Principle

                                  a. Straighten Plate                                b. Adjustment Roller Bending Plate                       c. Roller Rotation Roll Plate

Details

Roller

Siemens Electric Parts

The two lower rollers are driving ones and the upper is an idler one. Upper roller do vertical elevating moving at the center position of two lower rollers, elevating of upper roller is realized through motor, speed reducer, worm gear and worm. 

This is composed of movable manipulation table and control box. the elevating distance of down roller can be displayed one manipulation table through photoelectricity coder. 

Movable Control Panel

Main Motor

Manual Drop End

Small in size and lightweight. It can freely move between different work areas, adapting to changing operational needs.

The transmission of the bottom roller is realized by the main motor through the main reducer.

The manual drop end device is used when the cylindrical parts rolling are finished.

Machine construction

This three-roller symmetric rolling machine carries out the reeling of cylinder work piece by the pressing of the top roller and the face-to-face rolling of the top and bottom rollers. It is mainly composed of the working unit, the driving unit, the balancing unit, the base and the cone unit, etc.

1.The Working Unit

The working unit is composed of the bearing stand of the left and right rollers, one top roller, two bottom rollers, screw worm and worm wheel and some subsidiary parts. 

The driving of the bottom rollers is carried out with the main motor through the main decelerator motor. The output bearing of the main decelerator is transmitted to the two bottom rollers through a set of gears. The change of transmission direction is obtained through the direction change of the main motor.

2. The Main Driving Unit

3. The Application of the Unloading Unit 

The main driving unit is composed of the main motor, the main decelerator motor and some subsidiary parts. The driving of the bottom rollers is carried out with the main motor through the main decelerator motor. The output bearing of the main decelerator is transmitted to the two bottom rollers through a set of gears. The change of transmission direction is obtained through the direction change of the main motor.

When the cylinder work piece is complete, before taking it off the left bearing stand, make the top roller go up to its position, press the top roller at the rear with the balancing beam, and then pull out the shaft pin from the tapping bearing stand, tap down the bearing stand. The complete work piece goes off one side of the top roller.

Anhui Zhongrui Machine Manufacturing Co., Ltd. is located in Bowang Town, Bowang District, is a company specializing in the manufacturing of metal sheet and profile processing machinery. Established in 2002, RAYMAX primarily produces various complete sets of machine tools and accessories, including press brake machines, shearing machines, fiber laser cutting machines, fiber laser welding machines, deburring machines and rolling machines, etc. These products are widely used in industries such as automotive, marine, aviation, metallurgy, power, petrochemical, decoration, and construction. The products are sold throughout the country and exported to Southeast Asia, the Middle East, the European Union, South Africa, and other countries and regions. The company has fully obtained ISO: 9001 international quality management system certification, possesses self-operated import and export rights, and has obtained EU CE certification.It is a member unit of the China Chamber of Commerce for Import and Export of Machinery and Electronic Products.

Q: How can I choose a suitable machine?

A: Tell us the Max Working area, the material and its thickness you want to cut, we can help choose the best suitable machine.
 
Q: Are you a factory or a trading company?
A: We are a manufacturer. Our company was founded in 2002, and has more than 20 years of production experience.
 
Q: Where is your factory located? 
A: Our company is in Maanshan, Anhui Province, which is only half an hour's drive from Nanjing Lukou Airport. If you visit our company, we will arrange a special bus to meet you at the airport.
 
Q: Can we be your agent?
A: Welcome, we will help agent improve the market and supply all the service like machine technical problem or other after-sales problem, meanwhile, you can get big discount and commission.
 
Q: How does your factory do regarding quality control?
A: Quality has always been the first factor in our production and sales. We have CE and ISO certifications.
 
Q: Payment Terms?
A: T/T, L/C, Western Union, Paypal, etc.
 
Q: How long does it take to deliver the machine?
A: Generally, we will deliver the goods within 30 days. If the machine belongs to non-standard customized products, the time will be longer, but the longest time will not exceed 50 days.